3D Printer Kit
SINTRON TECHNOLOGY (HK) INTERNATIONAL CO.,LTD
|45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller.|
Guarantees: On-time Delivery 60 days
USD 355.95-399.95/packUSD 127.95-139.95/pieceUSD 52.95-55.95/packUSD 56.95-59.95/pieceUSD 39.95-49.95/pieceUSD 29.95-32.95/packUSD 20.95/pieceUSD 7.99-10.99/pack Buyer’s Notice — We will reply your mail within 24 hours normally. sometimes have a little delay due to the weekend or holiday. If you can’t get our mail after 48 hours, please check your spam or contact to us with other mail address. — We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback — We strive to deliver high quality customer service, If you are satisfied with our service, please kindly leave us a positive feedback. we ship your item within 48 hours, the shipping time is very quickly, hope you can give us positive feedback about shipping time. — Our pursuit is to make an easy and pleasant shopping environment for our respected customers. Your recognization will encourage us greatly and serve you better. Please message us before leaving 1 or 2 ratings, negative feedback or open any dispute. About Shippment — We only ship the item to your payment address for fast and accurate shipment. — Customs Duty are not included in the price, we will declare lower or other value you need on invoice and help to avoid this charge. But if those charge is still needed. Buyer need to asist for the customs clearance and pay these charges . — Due to the transit time is hightly depended and provided by Post Office. What we can do is ship your item fast after you paid, we can not control it after shipped. *Thanks for your understanding and patience. How to track my order? — Every single parcel from us will have a tracking number for our customer’s peace of mind. — Most of the tracking number, you can track here, htt p://ww w.17track.n et/en — Sometime it’s possible to meet problem during deliver, in this case, please try to contact us for help, we’ll investigate and solve the delivery problem. — Contact local post office to check the parcel status would be the fastest way when item shows arrived. When we ship your order? All the Items will be shipped within 2 working days after full payment is received.
(1) 3D Printer Controller RAMPS 1.4
The RepRap Arduino-compatible MEGA Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
Version 1.4 uses surface mount capacitors and resistors to further cover edge issue cases.
(1) USB type B receptacle.
(2) SD Card add on available.
(3) Fits 5 Pololu stepper driver board.
(4) LEDs indicate when heater outputs on.
(5) Expandable to control other accessories.
(6) Heated bed control with additional 11A fuse.
(7) Option to connect 2 motors to Z for Prusa Mendel.
(8) I2C and SPI pins left available for future expansion.
(9) It has provisions for the cartesian robot and extruder.
(10) All the Mosfets are hooked into PWM pins for versatility.
(11) 3 mosfets for heater / fan outputs and 3 thermistor circuits.
(12) Fused at 5A for additional safety and component protection.
(13) Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs.
(14) Servo style connectors are used to connect to the endstops, motors, and leds. These connectors are gold plated, rated for 3A, very compact, and globally available.
(2) Arduino-Compatible Mega 2560 R3
Fully compatible with original Arduino MEGA 2560 R3, with this product, you are able to use all the Arduino open source platform to create or learn interactive objects, it will be a lot of fun while you are creating and learning it, so just get this and start it, we also provide reference pdf files that can help you to improve skills very quickly. after all, time matters, the sooner you can improve your programing skills, the sooner you can create amazing projects!
Compared with UNO R3, this is with main Chip ATmega2560, with more I/O Pins, and additional 10 PWM output, of course, the EEPROM is also with larger space.
(3) A4988 StepStick Compatible Stepper Motor Driver Module
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the “step” input inputting one pulse drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened.
In the micro-step operation, A4988 chopping control inside automatically selects the current decay mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some fast decay, then the rest of the slow decay downtime. Mixed decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM) operation power consumption. Internal circuit protection includes: thermal shutdown with hysteresis, undervoltage lockout (UVLO), and crossover-current protection. Special power sequencing.
A4988 surface mount QFN package (ES), a size of 5 mm × 5 mm, nominal overall package height of 0.90 mm, with an exposed pad for enhanced thermal dissipation. This package is Pb (suffix-T), with 100% matte tin leadframe plating.
(4) LCD 12864 Graphic Smart Display Controller
This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” included.
After connecting this panel to your Ramps you don’t need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
We could provide more!!
below are 3 must get software and firmware:
1. Marlin: firmware to communicate all the parts. ( we include the code you need )
2. Printrun: the software to communicate between 3D printer and computer.
3. Slic3r: final step to get the Gcode. ( Gcode format is what you use to run your 3D printer )
if you need them, you can contact us after you purchase.
( please write: require 3D printer firmware and software )
if you are new, we can also instruct you how to connect all your electronics parts altogether, and let them communicate soon, so welcome to discuss with us 🙂
we have also collected some 3D model drawings, fee free to contact after your order.
Package List Includes
0 out of 5 (0 Ratings)
|Positive (0 %)||
4 Stars (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
TW-101 3D Printer Reprap Prusa i3 MK8 LCD
A$ 324.00 / piece
Eighth Generation Reprap Prusa i3 3D Printer DIY kit Free Shipping
A$ 256.00 / piece
Black color 3d printer filament 1.75mm high quality ABS filamento impresora extruder pla 1kg/spool for MakerBot/RepRap/Createbot
A$ 43.00 / piece
Miniature Kit Glass Cover Doll house Voice control Light turn on/off
FLSUN 3D Metal Printer 40m Filament
A$ 269.00 / piece
JennyPrinter3 Z360 Dual Extruder Nozzle Auto Leveling 3D Printer
A$ 1311.00 / piece
negotiate directly with the manufacturer
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.