FOTGA DP3000 DSLR Rig Set Movie Kit Shoulder Mount Rig for DSLR Cameras and Video Camcorders

FOTGA DP3000 DSLR Rig Set Movie Kit Shoulder Mount Rig for DSLR Cameras and Video Camcorders

80 % of buyers enjoyed this product! 0 orders
List price:
$ 599.00
$ 599.00

Product Description


High Quality,Genuine FOTGA Brand

Fotga DP3000 series is especially desinged for dslr/dv/hdv users by providing maximum flexibility for outdoor and indoor shootings.It is portable.Easy taking and will be very helpful on photographing.

****DP3000 M4 Quick-release A/B hard stops follow focus

A follow focus is a focus control mechanism used in film and video cameras. It is ergonomic rather than strictly necessary; in other words it does not contribute to the basic functionality of a camera but instead allows the operator to be more efficient and precise. It is usually operated by a focus puller but some camera operators prefer to pull their own focus .

The mechanism works through a set of gears on the follow focus that are attached to teeth on the focus ring of the lens. These gears feed to a wheel which, when turned by a focus puller, will spin the teeth and thus the ring on the lens.

This follow focus belongs to the new DP3000 series pubished by the FOTGA.It is with high quality,and light in weight.It is consisting of a improved gearbox,which promise no backlash or less backlash(<0.5mm).

This DP3000 Follow Focus also Integrated with A/B Hard Stops which have easy begin/end setups for fast repeatable racking between two points, and make focusing lenses that have no hard stops (such as Canon EF lenses) much easier.
The gear on it can be detached and insalled in other side,which makes it suitable for both left-hand and right-hand photographer.

The white mark ring is made of magnet material.It can be detached or attached very easliy and quickly on matel-made follow focus.You can also buy additional mark ring.

There is a A/B release hasp on side,which can be used as a side scale point for locating your focus when you put the whole follow focus series on your shoulder and some higher place,where you are unable to see the top middle scale point.

Comaparing to most follow focus on the market,it takes advantage on the gear size.It can work with 3 different size gear to meet your different need with various lens:

M0.8-38T gear: 38T (38 teeth) 0.8mm pitch,diameter is approx.28mm (included)
M0.8-43T gear: 43T (43 teeth) 0.8mm pitch,diameter is approx.31mm (included)
M0.8-65T gear: 65T (65 teeth) 0.8mm pitch,diameter is approx.49mm (included)

Quick-release version.Easily and quickly attach and detach.

Get a nice speed crank whip for your follow focus

Get newest upgrade DP500IIS follow focus

Material: Metal and plastic
Zero backlash(<0.5mm).
Long-life precision engineered gearbox enables accurate and reliable focusing
Compatible with industry standard Follow Focus Whip or Crank.
Gear drive can be mounted from both side.(Works for both right-handed and left handed)
This set includes flexible gearbelt can be used with any zoom or prime lenses with a wide range of lens diamters(any size from 46 to 110mm)
Adjustable locking systems
Mounts onto 15 mm Rod Support (60mm center to center difference).
MOD Drive Gear: Industry standard 0.8
Compatible with industry stand 15mm rods
Rail distance:60cm
Rail diameter: 15mm
net weight:250g

*** DP3000 M3 Quick-release 15mm rod rail support rig

This FOTGA DP3000 quick-release version 15mm rod rail baseplate support rig is with high quality.It is sturdy enough for supporting and stabilizing follow focus rig system with DSLR cameras.
Height of its plate can be adjusted by releasing and lock blue knob button.

With 1/4″ and 3/8″ holes at the bottom,which will be helpful to put a whole heavy follow focus system on a tripod for stablizing and safety.

Qcuick-release version.It is with a big blue release-lock button,which makes it is very easy and quick on attaching a camera.
With 1/4″ screw on the quick-release plate,which is suitable for cameras with 1/4″ mount hole.

There is also a safety-lock,which ensure your camera not fall off even you release the blue release-button.

Size of the quick-release plate is 40mmx70mm.


Material: metal
Color : black and blue
Rails length : 30cm
Rails dia : 15cm
Rails center-to-center distance : 60mm
Screws thread : 1/4 & 3/8
Height can be adusted from 65mm-71mm.

*** DP3000 M3 Swing-away matte box with donuts,filter holder rotatable

In still photography and video, a matte box is a device used on the end of a lens to block the sun or other light source in order to prevent glare and lens flare. It performs essentially the same function as a lens hood and also mounts in front of the lens, but usually includes adjustable fins called French flags.

Another purpose of a matte box is to hold glass or plastic filters in place in front of the lens. Today, matte boxes are made for DV cameras and HD cameras for the same reasons as for film cameras.

This Fotga DP3000 matte box is specially designed for most of the dv cameras with wide angle lenses.
It also works with standard 15mm rails, center-to-center rails distance 60mm.


Swing-Away : Wide Angle Mattebox has a Swing-Away Feature. You can easily swing-away the mattebox without disturbing the camera from the tripod and rail system and mount the mattebox again on the camera within a second. The knob on the top of the swing-away bracket helps you to swing the mattebox from the setup.

2 dual-purpose filter trays,supportinh 4″x4″ filter.One of the 2 filter trays is rotatable,which will be helpful when you use gradual ND filter.

French Flag/Side Flags : The flags provide extra flare reduction and improves the quality of videos. The side flags are quick removable. They can be attached /detached easily. The flags are attached firmly on the sunshade mattebox by hinge mechanism. The side flags can be opened to the desired length by using the small knob provided on the flags.

Compatible with wide angle lenses.

Compatible with 15mm rod ,center-to-center rails distance 60mm.

There are 2 15mm hole with center to center 60mm on the bracket by side,which makes you able to mount some other device by side.Besides,2pcs 15mm rod (20cm in length)included.

Height can be adjusted by 3.5cm.

4pcs different size donuts included.(103mm,76mm,64mm,51mm)

Material:Made of metal and plastic

You can also buy additional flag with 2 knob buttons to install the 4th flag at the bottom.(not included)

***DP3000 M2 handle grip stabilizer rig f 15mm rail rod shoulder support

This FOTGA DP3000 handle grip support rig is specially designed for a comfortable photographing.It is improved based on the ergonomics principle,much more suitable and comfortable than most handle support on the market for steady and safe holding by hand.


Includes 2 handle grips,which promise much more stable and safe holding of your device.Besides,it handle grips is made of rubber with anti-skid design.And it is bigger than most handle grips on the market on size.All these make it much more safe and comfortable for holding your device.

4pcs 90 degree 15mm rod clamp,which makes you able to adjust the position easily and quickly.

Suitable for Industry standard 15mm rail rod system

Made of durable anodized black aluminum.

The length of the rod is 30cm with standard 15mm thread,you can also extend the length with an adapter and another 15mm rod

Rubber material is comfortable and safe for shooting.

Suitable for 15mm rail rod follow focus system

Material: metal and rubber.
Rod Diameter: 15mm
Rod length:30cm

Suitable for:

15mm rail rod system

***DP3000 M2 Shoulder support stabilizer f 15mm Rod Support Rail System DSLR rig

This FOTGA DP3000 DSLR rig shoulder support mount is specially designed for a comfortable photographing.It will release pressure from your hand to your shoulder,and free your hand from the handle support.You can use your free hand to adjust focus,or any other things.Its Sponge rubber pad (integrated with ergonomics principle) on it makes your shoulder much confortable than most sold on the market.

Besides,it improves stability on photographing.

Great assisstant for you.


Provide steady video shooting with DSLR.It completely eliminates back neck and arms stress.
Suitable for Industry standard 15mm rail rod system.(rod centre to center distance is 60mm)
Flexible designed, easy to transform into different shooting mode.
Made of metal and sponge rubber
Sponge Rubber pad is comfortable for shooting.
Z shape bracket makes this shoulder support stabilizer able to be mounted on your right shoulder or left.
Suitable for all DSLR cameras.

Material: metal and Sponge.

Rail Diameter: 15mm

***DP3000 M1 top handle C cage bracket suppot rig for 15mm DSLR rod follow focus

This FOTGA DP3000 top handle cage bracket support rig is specially designed for a comfortable photographing.Its handle is improved based on the ergonomics principle,much more suitable and comfortable than most handles which is on the market for steady and safe handling by hand.


Handle grip is made of rubber with anti-skid design.And it is bigger than most handle grips on the market on size(diameter of the handle is about 13cm).All these make it much more safe and comfortable for handling your device.
Handle can be installed both side,for right hand or left hand.
Suitable for Industry standard 15mm rail rod system
Made of metal and rubber,Rubber material is comfortable easy for shooting.
The 15mm clamp center-to-center distance is 60mm.
There is a 1/4″ hole on the top of the C-shape cage bracket,which allows you mount device with 1/4″ mount,such as a friction magic arm with monitor,etc.
6 15mm holes on the bracket,makes you able to put more device on the bracket at the same time.
Suitable for 15mm rail rod follow focus system

Material: metal and rubber
Rod Diameter: 15mm
Center-to-center distance of the hole is 60mm.
Suitable for:

15mm rail rod system

Suitable for:

All DSLR cameras,Vedio cameras

Package including:

Fotga DP3000 M4 Quick-release Follow focus W/ A/B hard stops x1

0.8mm matching gear belt x 1 (adjustable for 46mm-110mm)

38T Gear x 1

43T Gear x 1

65T Gear x 1

Fotga DP3000 M3 Quick-release 15mm rod rail support rig x 1

Fotga DP3000 M3 Swing-away matte box x 1

Fotga DP3000 M2 handle support rig x 1

Fotga DP3000 M2 shoulder support rig x 1

Fotga DP3000 M1 top handle support rig x 1

Item Specifics

Unit Type: 
Package Weight: 
 2.500kg (5.51lb.)
Package Size: 
 29cm x 19cm x 10cm (11.42in x 7.48in x 3.94in)

Packaging Details

Unit Type: 
Our store ships to more than 200 countries and you can enjoy free shipping on all items sold on confer.com.au
Estimated Delivery Time is 7-30 business.

Note: The delivery time mentioned above does not include order processing time that usually varies from 1 to 3 days.
Different items have their own processing time, which is what we cannot control. But what we can do is try the best to let you receive your items as soon as possible.

The following cases should be taken into consideration regarding shipping times:
  • Weight and dimensions of a package
  • Place of Dispatch
  • Destination
  • Freight
Average Star Rating:
0 out of 5 ( 0 Ratings)

Feedback Rating for This Product

Positive (0%) 5 Stars (0)
4 Stars (0)
Neutral (0%) 3 Stars (0)
Neutral (0%) 2 Stars (0)
1 Stars (0)