3
Melting tin furnace, lead free pot, soldering furnace, stepless adjustable temperature tin leaching furnace CM-360AMelting tin furnace, lead free pot, soldering furnace, stepless adjustable temperature tin leaching furnace CM-360AMelting tin furnace, lead free pot, soldering furnace, stepless adjustable temperature tin leaching furnace CM-360AMelting tin furnace, lead free pot, soldering furnace, stepless adjustable temperature tin leaching furnace CM-360AMelting tin furnace, lead free pot, soldering furnace, stepless adjustable temperature tin leaching furnace CM-360A

Melting tin furnace, lead free pot, soldering furnace, stepless adjustable temperature tin leaching furnace CM-360A

60 % of buyers enjoyed this product! 0 orders
TODAY'S DEAL Ends in: 04:36:18
List price:
$ 34.00
Price:
$ 25.16

Product Description

Melting tin furnace, lead free pot, soldering furnace, stepless adjustable temperature tin leaching furnace CM-360A

B00004

Rated power

100W

Temperature range

50-520℃

Melting tin quantity

0.3kg

Frequency

50-60Hz

Tin pot diameter

38mm

The produkxt gross weight

0.6kg

Performance characteristics:

1.Cm series lead-free solder configuration of high-power heater, can quickly dissolve lead-free tin bar, from room temperature to 450℃, only 25 minutes (depending on the size of tin,would have subtle differences).

2.Adopt microcomputer chip intelligent control, double digital display, intuitive and clear heat, high heat sensitivity, rapid temperature returning, fast temperature compensation.

3.Lead-free tin furnace imported titanium material, high temperature resistance, corrosion resistance, abrasion resistance, durable.

4.The stove set data using touch screen keys to direct input, simply, and accurately.

5.The machine setting data can be stored for a long time without any shutdown or power failure

Working environment:

1.Working voltage:AC220±10V(Can be customized 110V)

2.Working temperature:0-55℃

3.When working humidity<90%RH non condensing

The operation method and function set:

1、Temperature setting:

(1).Open the tin furnace power switch, the operation panel will display the measured value of the temperature 3.0.0 and temperature setting value 2.8.0.0., directly using the button of “+”or “-” to adjust the temperature setting value, click the plus or minus keys will rise or fall in a unit, long press plus or minus will make the value continuous rising or falling, the set temperature value will save automatically after two seconds and it is a long-term preservation, not affected by the shutdown or power off.

(2).Open the tin furnace power, the operation panel will display the measured value of the temperature 3.0.0 and temperature setting value 2.8.0.0., using the shift key type * to adjust the temperature setting value, the number which decimal point stop behind, can be adjusted with the plus or minus “+ -” key. The set temperature value will save automatically after two seconds and it is a long-term preservation, not affected by the shutdown or power off.

2.Microcomputer self-adjusting:

If the measured value of the temperature and the temperature setting value deviation is a bit large (3-5 degrees), or the deviation of measured temperature value and pot inside actual temperature is too large (10-20 degrees), please carry out self tuning operation, press the shift key*and hold three seconds,the thermostat will automatically enter the self-tuning state, display AT and set temperature,the two subtitles will flash crossing each other ceaselessly, about 20min-40min,self-turning will be end off, then display the normal temperature value. When Self tuning is not the end, if you want to quit, press the shift key * not until stop flashing. The factory parameter values are optimal values, in general, we do not use self-adjusting.

3.Temperature compensation:

If the measured temperature value and the actual temperature in the furnace have been adjusted but the deviation is still high, the following method can be used to correct

(1).Press the CAL function key for two seconds, according to the measured value of the temperature 5C, temperature setting value 0.0, press + – the key to compensate. The compensation is completed, press the CAL button two times, save and exit.

Example: When the measured temperature value is higher 10℃ than the actual temperature value of the furnace, press the “-” key to adjust the measured temperature into 5C and temperature setting value -10, and then press CAL to save and exit. On the contrary, when the measured temperature value is lower 10℃ than the actual temperature value in the furnace, press the “+” key to adjust the measured temperature into 5C and temperature setting value -10, and then press CAL to save and exit.

(2).The factory parameter

Press the CAL function key for two seconds, display 5C 0.0, and then press the function key CAL, display Loc C, then press the function key CAL again, return normal window, 5C express the compensation value.

Loc express the lock, unlock.

4.Matters need attention:

(1).Other parameters can be adjusted when processing self-adjusting

(2).Self tuning need 20-40 minutes, after self-tuning, still need 10-20minnuts to stabilize, and it is a normal phenomenon that the temperature values will be up and down in this time.

Fault detect:

1.Starting up but no power, check the pipe is open or not, or the plug is plugged in or not.

2.After starting up, temperature value unchanged and no temperature rise, said heater disconnection

3.If the left display screen shows that the temperature is very high, the right display shows HIA or ORA and still flashing, indicates that the thermocouple open, or thermostat failure.

Packing list

1、Tin furnace machine   1

2、Operating instruction 1

3、Warranty card 1

4、certificate of soundness 1

5、Tin slag scraper    1(Except customized models)

6、Protective tube 2

Packaging Details

Unit Type: 
 piece
Our store ships to more than 200 countries and you can enjoy free shipping on all items sold on confer.com.au
Estimated Delivery Time is 7-30 business.

Note: The delivery time mentioned above does not include order processing time that usually varies from 1 to 3 days.
Different items have their own processing time, which is what we cannot control. But what we can do is try the best to let you receive your items as soon as possible.

The following cases should be taken into consideration regarding shipping times:
  • Weight and dimensions of a package
  • Place of Dispatch
  • Destination
  • Freight
Average Star Rating:
0 out of 5 ( 0 Ratings)

Feedback Rating for This Product

Positive (0%) 5 Stars (0)
4 Stars (0)
Neutral (0%) 3 Stars (0)
Neutral (0%) 2 Stars (0)
1 Stars (0)